本人在看了之后很惊讶 于是就问了一下此玩家（TMOY） 他的技巧
i was quite shocked when i saw your elegant corners first solution in the weekly competition.
could you tell me your elegant way to do it?
thanks!
以下是他的答复
Well, here's how I proceed to get elegant corners first solutions
- first I look for a good solution for corners, that is I perforn the equivalent of a FMC on the 2^3. This should take no more than 15-20 minutes;
- next I go back to the 3^3 and I try, if possible, to tweak my corners solution (mainly by replacing some single layer moves with double layer moves) to have a few edges solved at the same time;
- finally I solve edges, 2 at a time whenever possible. Since there are usually many different ways to pair them, I look for the one which gives me the skip of the whole middle layer if possible, or at least of the orientation step.
Of course the usual FMC stuff (premoves, reverse scramble, insertions, and so on) can be used too.
Hope this helps
