架十字的一小点技巧

乌木

 -Do the wrong move. For example, if doing R would place an edge, but doing R' would make it easy to place another edge in it's correct slot, then make the 2nd edge easy to place by doing R' and then do R2 to place the first edge after placing the 2nd.

第一条是不是说：如果做R可以复原好棱1；但如果做R'可以使（第二层的？）棱2与相应的角块正确合并好，则还是先做R'，弄好棱2（连同那角块）之后，再做R2复原刚才“先人后已”的棱1。

如果是这意思的话，请哪位举个具体例子上来，或者指正一下。

- If putting two edges in the wrong slot makes it easy to place the 3rd and 4th edges, then do that so once all the edges are in their correct position in relation to each other, then rotate that face CW or CC to get them lined up

第二条是不是说：如果两个（第二层的？）棱块各自搭错角块反而使第三棱和第四棱容易复原，则就那样搭错，等到所有的棱彼此相对位置正确之后再旋转那个面CW （顺时针？）或CC （逆时针？），直到它们排好。

不知何意，哪位来指正一下？

[此贴子已经被作者于2007-7-6 11:25:00编辑过]

乌木

4楼说：“我来举一个具体例子：将还原好的魔方底层朝上做以下步骤打乱：R2 F R

可以看到，如上打乱后只要做R就可以还原一个棱块（即魔方顶层右边的棱块），但是如果先做R'就能让另一个棱（即魔方顶层靠近你这边的棱块）容易还原，那么就先做R'F 来还原第二个棱，再做R2来还原第一个棱。”

其中的“R'F ”是不是应为“R'F' ”？

[此贴子已经被作者于2007-7-8 20:33:15编辑过]

乌木

我把6楼介绍的改为目前常用的配色，并试着解释如下：

 

   

乌木

3楼我对第二条的理解看来也有误。是不是如下图的例子，先不急于做D2以复原红黄和红蓝棱，而是先做B'使红白棱处于红黄棱的对面，再做R'使红绿棱处于红蓝棱的对面，最后做D2使底层的十字整体到位（对准四个侧面中心块）。

- If putting two edges in the wrong slot makes it easy to place the 3rd and 4th edges, then do that so once all the edges are in their correct position in relation to each other, then rotate that face CW or CC to get them lined up.