老外中肯的魔方评测（ 2~5阶） [复制链接]

tonylmd

金魔

花样爱好者

Rank: 8 Rank: 8

积分: 8970
帖子: 4217
精华: 13
UID: 22473

电梯直达

1^#

发表于 2009-2-9 09:18:05 |只看该作者 |正序浏览

以下内容来自www.speedsolving.com hardware area置顶贴
Comparisions Between Cubes
Thanks to Lofty for the idea; hopefully this will reduce clutter.
Blank entries indicate I have not used the cube and/or don't have enough info on them.
~
Rubik's Cube
Pros:Widely available, cheap, reacts well to silicone lubricant.
Cons:Needs to be broken in, not good for cutting corners.
Notes:After breaking in, becomes very loose (sometimes looser than DIYs can be made)
~
Rubik's 25th Anniversary Cube
Pros:Reacts very well to silicone lubricant, turns easily after breaking in.
Cons:Needs to be broken in, not amazing for cutting corners.
Notes:After breaking in, becomes very loose (sometimes looser than DIYs can be made)
~
Rubik's DIY
Pros:Cuts corners well, turns easily.
Cons:Comparatively expensive, high shipping costs, center caps fall out easily.
~
Chinese DIYs(cube4you, 9spuzzles)
Pros:Cuts corners well, turns easily, indentations in center caps cause them to fall out less frequently.
Cons:High shipping costs, performance varies between type and cube color.
Notes:Comes in three different types: (a), (b), and (c). Some cubes only available in certain types. Many colors to choose from. Whiteand green cubes turn best, as well as some transparent cubes (WARNING: transparent cubes are NOT competition-legal)
~
Edison Cube
Pros:Cuts corners well, adjustable centers, turns easily
Cons:Only available in Korea (essentially).
~
Famwealth Magic Cube
Pros:No springs = higher turning speed.
Cons:Does not turn well, cannot cut corners.
~
~
Rubik's Revenge (pre-retooling)
Pros:Turns smoothly, cuts corners well, sides fairly balanced, reacts well to lube.
Cons:Needs to be broken in to have the 'pros', pieces may break easily, broken-in cubes are very loose.
~
Rubik's Revenge (retooled)
Pros:Turns smoothly, cuts corners reasonably well, very little breaking in time, sides fairly balanced, reacts well to lube.
Cons:Quality varies from cube to cube.
~
Studio 4x4x4 See Rubik's Revenge.
~
Eastsheen 4x4x4
Pros:Can be used for speedcubing out of the box, requires no lubing or sanding.
Cons:Prone to lock-ups, gradually becomes worse over time.
Notes:6cm in each dimension; smaller than the other 4x4x4 cubes. Purple replaces orange by default.
~
~
Rubik's Professor
Pros:Available.
Cons:Pieces may break; requires breaking in, may require sanding, outer layers don't turn as well as inner layers.
Notes:Can be broken in into an extremely nice cube, which is very comparable with Olympic Cubes and the Mefferts cubes.
~
Studio 5x5x5 See Rubik's 5x5x5.
Mefferts 5x5x5(Limited Edition)
Pros:Outer layers and inner layers turn equally well, adjustable + spring-loaded core.
Cons:Relatively expensive, odd color scheme (red vs. white), tiles fall off easily, LIMITED QUANTITY.
~
Mefferts 5x5x5(Collector's Special)
Pros:Outer layers and inner layers turn equally well, adjustable + spring-loaded core.
Cons:Relatively expensive, stickers need almost immediate replacement, tensions need to be very fine-tuned or risk wing pops, LIMITEDQUANTITY.
~
Eastsheen 5x5x5
Pros:Can be used for speedcubing out of the box, requires no lubing or sanding.
Cons:Becomes looser over time, becomes more prone to pops over time.
Notes:6cm in each dimension, much significantly smaller than other 5x5x5's, same size as Eastsheen 4x4x4. Purple replaces orange by default.
~
~
Eastsheen 2x2x2
Pros:Can be used for speedcubing out of the box, does not require lubing, improves over time, larger than other 2x2x2 cubes.
Cons:Cannot cut corners at first, possible after breaking in.
Notes:5 cm in each dimension. Purple replaces orange by default.
~
Rubik's Mini Cube / Junior
Pros:Availability.
Cons:Pieces break relatively easily, hard to turn (even after lubing), falls apart often.
Notes:Very difficult to reassemble.
~
Rubik's Ice Cube
Pros:Looks neat, slightly smoother than the Rubik's Mini.
Cons:Pieces break relatively easily, falls apart often.
Notes:WARNING: this cube is NOT competition-legal.
~
~
~
原帖及更多讨论
http://www.speedsolving.com/forum/showthread.php?t=1665

[ 本帖最后由 tonylmd 于 2009-2-9 09:57 编辑 ]